Hollyland Lark M2 Wireless Mic Pairing guide

Unpack your wireless microphone set and ensure you have the following items

Connect the Hollyland receiver to the adapter

Plug the other end of the adapter into your PC's USB port

 Example below:

Place both microphones in their charging pods before starting the pairing process.
 

Connect the receiver to your computer and hold the yellow button on the receiver until “TX1” and “TX2” start blinking blue

Once the receiver's lights are blinking blue, pair the microphones one at a time
 

1. Take one microphone out of the charging pod and hold the yellow button until both the microphone and the receiver show a solid blue light. This pairing process takes about 5-10 seconds
2. Once paired, return the microphone to its charging pod and repeat step 7 with the other microphone.